Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - LuizCoelho13

Pages: [1]
1
HyperCam / Re: Error at the start of recording
« on: October 24, 2016, 09:17:47 PM »
Dear friend Olga,
Problem solved with your invaluable help. I changed the audio setting for System Audio and managed to make normal recordings. Still a defect of my handset to record the microphone. This should be drive problem that try solver here. I appreciate your efforts in supporting and thank. Luiz

2
HyperCam / Re: Error at the start of recording
« on: October 22, 2016, 05:21:43 AM »
I upgraded to the new beta you requested. Still the same error. I'm sending the  LOGS created by the system so that it can analyze. I appreciate your commitment and await your response. Sincerely Luiz

close.log
=====

Enter function: theApp.StopGrabOverlay()
Enter function: SaveAppPosition()
Enter function: ShowWindow(SW_HIDE)
Enter function: m_pAreaSelectDlg->StopClick(STOP_ON_CLOSE)
Enter function: StopClick
Leave function: StopClick
Deleting dialogs
m_pAudChannelsDlg
m_pNoteSetupDlg
m_pScreenNotesDlg
m_pAdvExtrasDlg
m_pAdvInterfaceDlg
m_pAdvAudioDlg
m_pAdvVideoDlg
m_pAdvancedOptions
m_pHelpDlg
m_pRecentRecs
m_pAreaSelectDlg: Delete dialog
CAreaSelectDlg OnShowWindow
m_pAreaSelectDlg: delete
m_pAreaSelectDlg: RemoveSyncEvent
m_pAreaSelectDlg: RemoveProtectionTimer
m_pAreaSelectDlg: release storage
m_pAreaSelectDlg: delete temp file
m_pAreaSelectDlg: EndDialog(frame rect)
m_pAreaSelectDlg: delete frame rect
m_pAreaSelectDlg: ResetTrayBand
m_pAreaSelectDlg: FreeRawProps
m_pRecordDlg
m_pInfoDlg
m_pMainDlg
EndDialog(0)
Enter function: Write stop state
--------------------------------------------------------------
start.log
=====
Recording rect: 1920, 0, 3840, 1080
Graph state: 48
Enter function: CheckExtrasDlg
Leave function: CheckExtrasDlg
Enter function: CheckInterfaceDlg
Leave function: CheckInterfaceDlg
Enter function: Prepare
Output folder is correct: G:\TRABALHOS
Enter function: MakeUniqueFilename
Output format: mp4
Leave function: MakeUniqueFilename
Video file name: G:\TRABALHOS\2016_10_13_22_01_07_1920x1080.mp4
Set Screen params
Enter function: CGraph::Init
Enter function: CreateFilters
Add filters:
 - SolveigMM Screen Source Filter
 - Audio Mix
Enter function: AddAudioDeviceUsingFNameAndGUID
FriendlyName Microfone (C-Media USB Headphone Set  ), GUID {7BD0D137-1241-4C58-BF13-425667B68F7C}
Moniker FriendlyName Microfone (C-Media USB Headphone Set  )
Leave function: AddAudioDeviceUsingFNameAndGUID
 - Audio Src: Microfone (C-Media USB Headphone Set  )
Enter function: Set audio pin
   Enum audio pins
   pin name: Capture
       it's output pin
   pin name: Volume principal
       it's input pin
   query input mixer
   channel enabled
Leave function: Set audio pin
 - Audio Pin: Volume principal
 - SolveigMM Stat filter
 - Set options for SolveigMM Stat filter
 - SolveigMM WASAPI filter
 - SolveigMM MP4 Multiplexer
 - SolveigMM File Writer: G:\TRABALHOS\2016_10_13_22_01_07_1920x1080.mp4
Leave function: CreateFilters
Enter function: BuildGraph
Enter function: ConfigScreenSrc
Screen capture filter parameters:
 - recording rect: width=1920, height=1080
 - frame hwnd: 01B0530
 - recording frame rate:    10.00
 - recording playback rate:    10.00
 - record mouse: TRUE
 - capture layered: TRUE
 - capture overlay: TRUE
 - star burst: TRUE
 - left button color: 255
 - right button color: 16711680
 - star size: 6
 - SMHC_OverlayHook: 8847360
 - click volume:     0.51
Leave function: ConfigScreenSrc
Filters connected: ScreenSrc, Encoder
Enter function: ConfigureVideoEncoder
ApplyIStreamEncoderSettings
ApplyIStreamEncoderSettings succeeded
CreateVideoProps succeeded
Leave function: ConfigureVideoEncoder
Filters connected: Encoder, MP4Muxer
Video graph was built
Click file is selected: 16-44100
Connect SolveigMM Screen Source Filter with Audio Mix. Status: Succeeded
Connect SolveigMM WASAPI filter with Audio Mix. Status: Succeeded
Connect Microfone (C-Media USB Headphone Set  ) with Audio Mix. Status: Succeeded
Audio format: 16-44100
Connect SolveigMM Screen Source Filter with Audio Mix. Status: Succeeded
Connect SolveigMM WASAPI filter with Audio Mix. Status: Succeeded
Connect Microfone (C-Media USB Headphone Set  ) with Audio Mix. Status: Succeeded
Connect Audio Mix with SolveigMM Stat filter. Status: Succeeded
Connect SolveigMM Stat filter with PCM. Status: Succeeded
Connect PCM with FFmpeg AAC. Status: Succeeded
Set audio format:
Set audio format: ok.
Connect FFmpeg AAC with SolveigMM MP4 Multiplexer. Status: Succeeded
Audio graph was built
Filters connected: MP4Muxer, FileWriter
Turn off graph clock
Set sync by stream offsets
Leave function: BuildGraph
CGraph::Init(): ok
Leave function: Prepare
IMediaControl::Run failed. Error 0x80004005: Erro não especificado
CGraph::Run failed. Error 0x80004005: Erro não especificado
CGraph::Status. Error 0x80004005: Erro não especificado
CGraph string error: (null)
Graph Event occured: message 512, param1 1, param2 32

Graph Event occured: message 512, param1 1, param2 32

Graph Event occured: message 512, param1 1, param2 32

Enter function: CAreaSelectDlg UpdateTabButtonsArea
CAreaSelectDlg GraphState
CAreaSelectDlg InitVolIndicator
Enter function: CAreaSelectDlg VolIndicator
CAreaSelectDlg device - Microfone (C-Media USB Headphone Set  )
Enter function: CVolumeLevel EnumAvaliableFormats
CVolumeLevel Clear
CVolumeLevel Enum
Log MixFormat
Format: 65534, Sample rate: 48000, Channels: 1, BpS 32
Log TestFormat
Format: 1, Sample rate: 48000, Channels: 1, BpS 16
Leave function: CVolumeLevel EnumAvaliableFormats3
CAreaSelectDlg VolIndicator1
CAreaSelectDlg Sys device - 1
CAreaSelectDlg preVolIndicator
CVolumeLevel Reset
CVolumeLevel DevEnum
CVolumeLevel DefDevice
CVolumeLevel EnumFormats
Enter function: CVolumeLevel EnumAvaliableFormats
CVolumeLevel Clear
CVolumeLevel Enum
Log MixFormat
Format: 65534, Sample rate: 44100, Channels: 2, BpS 32
Log TestFormat
Format: 1, Sample rate: 44100, Channels: 2, BpS 16
Leave function: CVolumeLevel EnumAvaliableFormats3
CVolumeLevel Init
CVolumeLevel Activate
CAreaSelectDlg VolIndicator
Leave function: CAreaSelectDlg VolIndicator
CAreaSelectDlg CALLTEXT
CAreaSelectDlg CALLTEXT out
Leave function: CAreaSelectDlg UpdateTabButtonsArea
Audio options dialog, on show
Update settings in audio settings dialog: no_device=0, rec_snd=1, is_record_started =0
Update settings in audio settings dialog: no_device=0, rec_snd=1, is_record_started =0
Audio options dialog, on show
Update settings in audio settings dialog: no_device=0, rec_snd=1, is_record_started =0
Enter function: CAreaSelectDlg UpdateTabButtonsArea
CAreaSelectDlg GraphState
CAreaSelectDlg InitVolIndicator
Enter function: CAreaSelectDlg VolIndicator
CAreaSelectDlg device - Microfone (C-Media USB Headphone Set  )
Enter function: CVolumeLevel EnumAvaliableFormats
CVolumeLevel Clear
CVolumeLevel Enum
Log MixFormat
Format: 65534, Sample rate: 48000, Channels: 1, BpS 32
Log TestFormat
Format: 1, Sample rate: 48000, Channels: 1, BpS 16
Leave function: CVolumeLevel EnumAvaliableFormats3
CAreaSelectDlg VolIndicator1
CAreaSelectDlg Sys device - 1
CAreaSelectDlg preVolIndicator
CVolumeLevel Reset
CVolumeLevel DevEnum
CVolumeLevel DefDevice
CVolumeLevel EnumFormats
Enter function: CVolumeLevel EnumAvaliableFormats
CVolumeLevel Clear
CVolumeLevel Enum
Log MixFormat
Format: 65534, Sample rate: 44100, Channels: 2, BpS 32
Log TestFormat
Format: 1, Sample rate: 44100, Channels: 2, BpS 16
Leave function: CVolumeLevel EnumAvaliableFormats3
CVolumeLevel Init
CVolumeLevel Activate
CAreaSelectDlg VolIndicator
Leave function: CAreaSelectDlg VolIndicator
CAreaSelectDlg CALLTEXT
CAreaSelectDlg CALLTEXT out
Leave function: CAreaSelectDlg UpdateTabButtonsArea
Update settings in audio settings dialog: no_device=0, rec_snd=1, is_record_started =0
Audio options dialog, update audio encoders list
   audio device:Microfone (C-Media USB Headphone Set  )
   audio pin:Volume principal
   audio compressors count: 11
   add to combo:
      FFmpeg AAC
Audio options dialog, load audio compressor settings
Update settings in video settings dialog: no_encoders=0, rec_video=1, is_record_started =0
Audio options dialog, on show
Update settings in audio settings dialog: no_device=0, rec_snd=1, is_record_started =0
Enter function: CAreaSelectDlg UpdateTabButtonsArea
CAreaSelectDlg GraphState
CAreaSelectDlg InitVolIndicator
Enter function: CAreaSelectDlg VolIndicator
CAreaSelectDlg device - Microfone (C-Media USB Headphone Set  )
Enter function: CVolumeLevel EnumAvaliableFormats
CVolumeLevel Clear
CVolumeLevel Enum
Log MixFormat
Format: 65534, Sample rate: 48000, Channels: 1, BpS 32
Log TestFormat
Format: 1, Sample rate: 48000, Channels: 1, BpS 16
Leave function: CVolumeLevel EnumAvaliableFormats3
CAreaSelectDlg VolIndicator1
CAreaSelectDlg Sys device - 1
CAreaSelectDlg preVolIndicator
CVolumeLevel Reset
CVolumeLevel DevEnum
CVolumeLevel DefDevice
CVolumeLevel EnumFormats
Enter function: CVolumeLevel EnumAvaliableFormats
CVolumeLevel Clear
CVolumeLevel Enum
Log MixFormat
Format: 65534, Sample rate: 44100, Channels: 2, BpS 32
Log TestFormat
Format: 1, Sample rate: 44100, Channels: 2, BpS 16
Leave function: CVolumeLevel EnumAvaliableFormats3
CVolumeLevel Init
CVolumeLevel Activate
CAreaSelectDlg VolIndicator
Leave function: CAreaSelectDlg VolIndicator
CAreaSelectDlg CALLTEXT
CAreaSelectDlg CALLTEXT out
Leave function: CAreaSelectDlg UpdateTabButtonsArea
Update settings in audio settings dialog: no_device=0, rec_snd=1, is_record_started =0
Recording rect: 0, 0, 1920, 1080
Graph state: 48
Enter function: CheckExtrasDlg
Leave function: CheckExtrasDlg
Enter function: CheckInterfaceDlg
Leave function: CheckInterfaceDlg
Enter function: Prepare
Output folder is correct: C:\Users\Coelho\Documents\HyperCam4
Enter function: MakeUniqueFilename
Output format: mp4
Leave function: MakeUniqueFilename
Video file name: C:\Users\Coelho\Documents\HyperCam4\2016_10_21_20_10_30_1920x1080.mp4
Set Screen params
Enter function: CGraph::Init
Enter function: CreateFilters
Add filters:
 - SolveigMM Screen Source Filter
 - Audio Mix
Enter function: AddAudioDeviceUsingFNameAndGUID
FriendlyName Microfone (C-Media USB Headphone Set  ), GUID {7BD0D137-1241-4C58-BF13-425667B68F7C}
Moniker FriendlyName Microfone (C-Media USB Headphone Set  )
Leave function: AddAudioDeviceUsingFNameAndGUID
 - Audio Src: Microfone (C-Media USB Headphone Set  )
Enter function: Set audio pin
   Enum audio pins
   pin name: Capture
       it's output pin
   pin name: Volume principal
       it's input pin
   query input mixer
   channel enabled
Leave function: Set audio pin
 - Audio Pin: Volume principal
 - SolveigMM Stat filter
 - Set options for SolveigMM Stat filter
 - SolveigMM WASAPI filter
 - Video encoder: FFmpeg libx264
 - Audio Encoder: PCM
 - Audio Encoder: FFmpeg AAC
 - SolveigMM MP4 Multiplexer
 - SolveigMM File Writer: C:\Users\Coelho\Documents\HyperCam4\2016_10_21_20_10_30_1920x1080.mp4
Leave function: CreateFilters
Enter function: BuildGraph
Enter function: ConfigScreenSrc
Screen capture filter parameters:
 - recording rect: width=1920, height=1080
 - frame hwnd: 0405B2
 - recording frame rate:    10.00
 - recording playback rate:    10.00
 - record mouse: TRUE
 - capture layered: FALSE
 - capture overlay: FALSE
 - star burst: FALSE
 - left button color: 255
 - right button color: 16711680
 - star size: 6
 - SMHC_OverlayHook: 0
 - click volume:     0.00
Leave function: ConfigScreenSrc
Filters connected: ScreenSrc, Encoder
Enter function: ConfigureVideoEncoder
ApplyIStreamEncoderSettings
ApplyIStreamEncoderSettings succeeded
CreateVideoProps succeeded
Leave function: ConfigureVideoEncoder
Filters connected: Encoder, MP4Muxer
Video graph was built
Connect SolveigMM WASAPI filter with Audio Mix. Status: Succeeded
Connect Microfone (C-Media USB Headphone Set  ) with Audio Mix. Status: Succeeded
Connect Audio Mix with SolveigMM Stat filter. Status: Succeeded
Connect SolveigMM Stat filter with PCM. Status: Succeeded
Connect PCM with FFmpeg AAC. Status: Succeeded
Set audio format:
Set audio format: ok.
Connect FFmpeg AAC with SolveigMM MP4 Multiplexer. Status: Succeeded
Audio graph was built
Filters connected: MP4Muxer, FileWriter
Turn off graph clock
Set sync by stream offsets
Leave function: BuildGraph
CGraph::Init(): ok
Leave function: Prepare
IMediaControl::Run failed. Error 0x80004005: Erro não especificado
CGraph::Run failed. Error 0x80004005: Erro não especificado
CGraph::Status. Error 0x80004005: Erro não especificado
CGraph string error: (null)
Graph Event occured: message 512, param1 1, param2 32

Graph Event occured: message 512, param1 1, param2 32

Enter function: CAreaSelectDlg UpdateTabButtonsArea
CAreaSelectDlg GraphState
CAreaSelectDlg InitVolIndicator
Enter function: CAreaSelectDlg VolIndicator
CAreaSelectDlg device - Microfone (C-Media USB Headphone Set  )
Enter function: CVolumeLevel EnumAvaliableFormats
CVolumeLevel Clear
CVolumeLevel Enum
Log MixFormat
Format: 65534, Sample rate: 48000, Channels: 1, BpS 32
Log TestFormat
Format: 1, Sample rate: 48000, Channels: 1, BpS 16
Leave function: CVolumeLevel EnumAvaliableFormats3
CAreaSelectDlg VolIndicator1
CAreaSelectDlg Sys device - 1
CAreaSelectDlg preVolIndicator
CVolumeLevel Reset
CVolumeLevel DevEnum
CVolumeLevel DefDevice
CVolumeLevel EnumFormats
Enter function: CVolumeLevel EnumAvaliableFormats
CVolumeLevel Clear
CVolumeLevel Enum
Log MixFormat
Format: 65534, Sample rate: 44100, Channels: 2, BpS 32
Log TestFormat
Format: 1, Sample rate: 44100, Channels: 2, BpS 16
Leave function: CVolumeLevel EnumAvaliableFormats3
CVolumeLevel Init
CVolumeLevel Activate
CAreaSelectDlg VolIndicator
Leave function: CAreaSelectDlg VolIndicator
CAreaSelectDlg CALLTEXT
CAreaSelectDlg CALLTEXT out
Leave function: CAreaSelectDlg UpdateTabButtonsArea
-------------------------------------------------------------------------------

WASAPISource.log
===========
Enter function: -----------------CompleteConnect
WASAPI flt: Format Int - 2ch, 44100Hz, 16bps, 1
WASAPI flt: Format Ext - 2ch, 44100Hz, 16bps, 1
Leave function: -----------------CompleteConnect
Enter function: -----------------PAUSE
EnterTime = 1727411
CDynamicSource pause: 0x00000000
LeaveTime = 1727411
Leave function: -----------------PAUSE
Enter function: -----------------PAUSE
EnterTime = 1728474
CDynamicSource pause: 0x00000000
LeaveTime = 1728475
Leave function: -----------------PAUSE

----------------------------------------------------
SMM_ScrCapture.log
=============
Media type
   MajorType: {73646976-0000-0010-8000-00AA00389B71}
   Subtype: {E436EB7D-524F-11CE-9F53-0020AF0BA770}
   FormatType: {05589F80-C356-11CE-BF01-00AA0055595A}
      VIDEOINFOHEADER
         Source{0,0,0,0}, Target{0,0,0,0}
         BitRate=0, BitErrorRate=0, AVGTimePerFrame=100
      BITMAPINFOHEADER
         Size=40, {1920,1080}, Planes=1, BitCount=24, SizeImage=6220800
         XPelsPerMeter=0, YPelsPerMeter=0, ClrUsed=0, ClrImportant=0
Media type
   MajorType: {73646976-0000-0010-8000-00AA00389B71}
   Subtype: {32595559-0000-0010-8000-00AA00389B71}
   FormatType: {05589F80-C356-11CE-BF01-00AA0055595A}
      VIDEOINFOHEADER
         Source{0,0,0,0}, Target{0,0,0,0}
         BitRate=0, BitErrorRate=0, AVGTimePerFrame=100
      BITMAPINFOHEADER
         Size=40, {1920,1080}, Planes=1, BitCount=16, SizeImage=4147200
         XPelsPerMeter=0, YPelsPerMeter=0, ClrUsed=0, ClrImportant=0
Time 1727409
stop->pause
BeforeCapture TimeGetTime 1727411, PerformanceCOunter 17275775609
DrawIcon (3108, 293) [3108, 0, 0][294, 1, 0] is succeeded
After_Capture TimeGetTime 1727434, PerformanceCOunter 17276006655

 0 - 100  (25) 4147200 SPLICEPOINT TIMEVALID STOPVALID CONTROL
BeforeDeliver TimeGetTime 1727434, PerformanceCOunter 17276007226
After_Deliver TimeGetTime 1727441, PerformanceCOunter 17276069022

pause->stop
stop->stop
Time 1728443
stop->pause
pause->stop
-----------------------------------------------
SMM_PipeConsoleReencoder.log
====================
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~CLogger::CreateLog~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CPipeConsoleReencoder::Pause() - start

/*CPipeConsoleReencoder::StartStreaming()*/
CPipeConsoleReencoder::Pause() - end
CPipeConsoleReencoder::Pause() - start

/*CPipeConsoleReencoder::StartStreaming()*/
CPipeConsoleReencoder::Pause() - end
CPipeConsoleReencoder::Stop() - start

Frame delivered: 0, duration: 1312
Average framerate (100*fps): 0
CPipeConsoleReencoder::Stop() - end
CPipeConsoleReencoder::Stop() - start

Frame delivered: 0, duration: 672
Average framerate (100*fps): 0
CPipeConsoleReencoder::Stop() - end
Video DeliverEndOfStream
CPipeConsoleReencoder::Pause() - start

/*CPipeConsoleReencoder::StartStreaming()*/
CPipeConsoleReencoder::Pause() FAILED
CPipeConsoleReencoder::Pause() - end
CPipeConsoleReencoder::Stop() - start
CPipeConsoleReencoder::Stop() - end
CPipeConsoleReencoder::Stop() - start
CPipeConsoleReencoder::Stop() - end
Video DeliverEndOfStream
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~CLogger::CloseLog~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

--------------------------------------------

SMM_PipeConsoleReencoder.log
====================
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~CLogger::CreateLog~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~CLogger::CloseLog~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~







3
HyperCam / Error at the start of recording
« on: October 20, 2016, 10:03:21 AM »
    I am not able to start a recording. Select the recording area and when I click save the message below. I request support. I thank Luiz Coelho

               ###  You can not start recording    CDSPlayer::OnStart()
                                                                   (Unspecified error hr=0x80004005)   ###

Pages: [1]